1/Decal process
The decal process of the glass roasted flower wine bottle is an important link in the wine bottle production process, which will directly affect the whole external shape of the wine bottle, the evenness of the decals is directly reflected in the quality of the finished bottle. Let's take a look at the glass roast flower wine decals process points to note!
Glass roasted flower wine bottle in the process of decal points to note!

1/ The water must be clean. Decal is an important part in the process of baking flowers in liquor bottles. The water source in decal is required to be clean so as to keep the outside of liquor bottles clean and smooth, in order to make decals more uniform, if there are more impurities in the water source, such as the presence of fine particles, in the decal process, it is very likely to make decals appear uneven phenomenon, after the finished liquor bottle, will appear the phenomenon of broken roasted flowers, such bottles are not qualified. So the water must be clean.

2/ When decals must put decals. Liquor bottle in the process of roasted flowers, decals placed in the right, not offset, after the roasted flowers in the bottle color will be very uniform, can be perfectly combined with the bottle together. If the decals are placed in the case of deviation, after the finished products in the bottle decals are also very bad, affecting the appearance of the bottle.

3/ During the process of decal, try to make the decal even with a scraper. If the decal can not be perfectly combined with the bottle, if there are bubbles, when the liquor bottle is finished, the phenomenon of cracking the roasted flowers will appear, such liquor bottles can not be sold directly, need to be re-modified back to the factory, or re-through the whole process of flower baking.

2/Roast flower technology

The manufacturing technology of the roasted flower wine bottle is to stick the plastic decal directly on the blown glass products, and send it into the baking kiln by the conveyor belt, can be made with beautiful color patterns of glass products. The glass products with three-dimensional color pattern can be obtained by combining the technology with the pressing pattern of the mould.

      Characteristics of roasted flower wine bottle: colorful, roasted flower vase different colors, now the roasted flower wine bottle is not only colorful, many are exquisite flower paper precision and brightness. Different parchment affixed to different bottles, certainly reflects the color and effect of different. It is the design and process that are important to bake flowers.

3/Spraying process

Pre-processing equipment: the main purpose of this process is to enhance the adhesion of the workpiece, it is mainly by pre-off, main off, table adjustment several parts, it is important to remember to keep the room temperature stable when operating.

Preheating treatment: its role is also to enhance the adhesion of the workpiece, mainly so that the spray chamber to a certain temperature.

Dust blowing equipment: this step is mainly to ensure the clean construction environment, if the standard dust-free workshop, this link can be skipped. This is because if there is dust on the glass, then the surface of the work will have a sand-like particle feeling, the surface is not smooth enough.

Spraying equipment: if it is manual spraying, there are very high standards for workers' skills, but now most manufacturers are using robot spraying, although the machine is more reliable than manual spraying, but don't forget that there are no missing areas need to recharge spray.

Paint drying: before the drying operation, the paint has a leveling stage, so the distance between the drying room and the spraying room should be suitable, to control around 6 ~ 8 meters is better, in addition, the need to pay attention to the temperature and baking time.

“Three wastes” treatment: today's industrial production all pay attention to low-carbon environmental protection, especially after the glass processing of waste water, waste gas and waste residue must be treated properly, wanton emissions will not only pollute the environment, it's also against the Law!

4/ Sand coating process

Glass Bottle Grit introduction:

Paint drying: before the drying operation, the paint has a leveling stage, so the distance between the drying room and the spraying room should be suitable, to control around 6 ~ 8 meters is better, in addition, the need to pay attention to the temperature and baking time.

The method is: on the surface of glass products, screen printing a layer of the pattern pattern formed by the flux. To be printed on the pattern after drying, and then sanding processing. Then after high temperature baking, there is no pattern on the surface of the sand will melt in the glass, and the screen printing pattern of the place due to the role of the flux, the pattern on the sand can not be fused in the glass surface. After baking, the transparent floor pattern will be revealed through the translucent sand surface, forming a special decorative effect. Sanded silk screen flux, from iron(III) oxide, talcum powder, clay, etc. , grinding with ball mill, fineness of 350 mesh, silk screen before using adhesive blending.

Second, we should be aware of the preservation of glass bottles know how to distinguish:

  The first thing to check is whether the bottle is intact: intact glass bottles including the bottle body, cap, bottle label, some wineries choose a one-time anti-counterfeiting cap, open the cap after its damage and throw away, after opening the bottle cap, the collector should put the bottle cap and the attachment away.

Then is the taste of glass bottles: some ceramic bottles if due to the fine collision of small defects, will seriously affect its value. So try to ensure the taste of the bottle, handle it gently. As well as the identity of glass bottles: distinguish a container is not for the bottle, its only symbol should be the wine label, so after the preservation of collectors must pay attention to glass craft bottles maintenance, glass craft bottles these glassware are simple and dirty. General glassware in the use of cleaning agents to flush it. If the use of a long time, the accumulation of stains, then to use a fine cloth dipped in decontamination powder repeated scrub, or with a fine cloth dipped in warm vinegar scrub, decontamination effect will be better.